Archive for November, 2010

Synthetic Fiber Carpet

Thursday, November 25th, 2010

The following paragraphs summarize the work of Synthetic Fiber Carpet experts who are completely familiar with all the aspects of Synthetic Fiber Carpet. Heed their advice to avoid any Synthetic Fiber Carpet surprises.

If you base what you do on inaccurate information, you might be unpleasantly surprised by the consequences. Make sure you get the whole Synthetic Fiber Carpet story from informed sources.

Nylon
The fiber nylon was introduced first by the DuPont Chemical Company in 1938. Several years later, after a great deal of development, nylon became the first synthetic fiber to be used in the entire carpeting industry.

The first 3 generations of fiber experienced many problems with the worst being staining. The 4th generation fiber of nylon had a mill applied coating that solved a majority of the staining problems. The ability of the fiber to repel water and oil based spills as well as soil helped to propel nylon into the top selling carpet fibers out there.

After several other changes, the DuPont company introduced the fifth generation nylon fiber. This stain resistant fiber would repel most dye stains if treated in a reasonable time. This fiber is more accurately called an acid dye blocker in that it doesn’t allow acid dyes to penetrate and stain the fiber.

The protective coating mill is applied and fills the dye sites with anionic molecules.

Tip
An easy way to test fiber for the presence of a fluorochemical is to cut a couple of fibers from a non traffic area and apply a few drops of oil and water mixture. If it beads up, then there is a nactive fluorochemical present.

Whenever testing for the presence of the acid dye blocker, you should again cut a couple of fibers from a non traffic area, then immerse the fibers in a red kool-aid mixture and wait for 5 minutes or so. Remove the fiber from the liquid and flush with neutral detergent solution. If the acid blockers are present and active, there will be no discoloration.

Polyester
The fiber of polyester was first introduced into the garment industry around in the 1950s. By the late 1960s, polyester was introduced into the carpet industry as a face yarn. In hand, feel, and appearance it is similar to nylon, although it doesn’t possess that same resiliency.

Polyester doesn’t absorb water based spills, isn’t affected by urine or kool-aid, but it will absorb oil based spills. Polyester is non allergenic and mildew resistant.

Acrylic/modacrylic
Both of these fibers were first used as carpet yarns around the late 1940s. They disappeared around 1988 due to the competition from other fibers. In was reintroduced to the market around 1990 in Berber styling.

This was done so that people could take advantage of the wool like appearance, hand feel, and the fact that its more spot resistant, much easier to clean, and not damaged in the ways that wool is.

Olefin
Olefin is the latest of the synthetic fibers to be adopted to carpets. Once only available in continous filament, it is now produced in staple form as well. Olefin has a wide variety of uses that include primary and secondary backing of tufted carpets, warp yarns, and other uses as well.

That’s how things stand right now. Keep in mind that any subject can change over time, so be sure you keep up with the latest news.

A garage addition

Sunday, November 14th, 2010

When you think about A garage addition, what do you think of first? Which aspects of A garage addition are important, which are essential, and which ones can you take or leave? You be the judge.

I trust that what you’ve read so far has been informative. The following section should go a long way toward clearing up any uncertainty that may remain.

Does our older child need a little more liberty? Your work from home or maybe you just feel that you need another room for a special project that you want to start? Then the solution is to construct a new addition to your garage.

By making an addition to your garage you can add to the living space in your house, no matter what type of garage you own: detached or attached to the house. The space above the garage can be converted into a private living space for your older child, guests or a live-in parent. You can convert your garage into your home office. You could very well find here the peace and quiet needed for your work. Also, the new addition can be converted into a music studio if you put some simple sound proofing measures into place.

In order to start planning for your garage addition, first prepare a budget and then hire a professional because this is a complex project. Also, you may need to hire an architect to help you with the construction plans.

Now that wasn’t hard at all, was it? And you’ve earned a wealth of knowledge, just from taking some time to study an expert’s word on A garage addition.

Tools You May Need for Your Next Kitchen Remodeling Project

Wednesday, November 3rd, 2010

If you’re seriously interested in knowing about Tools You May Need for Your Next Kitchen Remodeling Project, you need to think beyond the basics. This informative article takes a closer look at things you need to know about Tools You May Need for Your Next Kitchen Remodeling Project.

So far, we’ve uncovered some interesting facts about Tools You May Need for Your Next Kitchen Remodeling Project. You may decide that the following information is even more interesting.

Are you a homeowner who has recently decided that a remodeled kitchen is just what you need? If so, there is a good chance that you may want to do that remodeling yourself. If that is the case, there are a number of tools, likely a large number of tools, which you will need. While there is a good chance that you may already have the majority of the tools needed for your next kitchen remodeling project, there is also a chance that you might not. Rest assure though because the majority of the tools needed can be found right at one of your local home improvement stores.

When it comes to determining the tools that you will need, when starting your remodeling, it is important to determine which type of remodeling you will be doing. For instance, if you are installing a new set of kitchen cabinets, you will find that the tools needed may vary a little bit from the tools that would be used to replace your kitchen floor. That is why it is advised that you determine exactly what in your kitchen you would like remodeled, as well as what types of tools will be needed. Despite the fact that you may need different tools for different projects, there are a number of common tools; common tools that you may need no matter what kitchen remodeling project you are working one.

Perhaps, the most important tools to have is a hammer. Hammers are used on a wide variety of different kitchen remodeling projects, particularly ones that require nails. Hammers can also be used to help position a tile or countertop piece into a tight space. Since hammers are used all around the house, sometimes on a daily basis, there is a good chance that you already own a hammer. In fact, there is a good chance that you own more than one!

Aside from a hammer, it is also a good idea to have a collection of screwdrivers on hand. Although there is a good chance that you already own a couple of screwdrivers, you may want a multi-function screwdriver. A multi-function screwdriver is one that easily allows you to change the screwdriver heads, in no time at all. In fact, if you are really looking to save time, you may want to purchase an electric screw gun.

A putty knife is another tool that you may need to use, when remodeling your kitchen. Putty knifes are ideal when replacing a kitchen countertops or when retiling your kitchen floor. They are great for removing unwanted or unneeded caulk or spreading around the glue that is needed to hold your kitchen tiles down. Putty knifes are common tools, but they are not as common as hammers or screwdrivers; therefore, you may need to purchase yourself one.

It may also be a good idea to have box cutters or handsaws on hand. If you are replacing the flooring in your kitchen or if you are installing a new laminate kitchen countertop, there is a good chance that you need to cut materials down to size. In some cases, a box cutter could do, but in other cases, you may need a handsaw. That is why it is best to have them both on hand.

In addition to the above mentioned tools, you may need to have a wrench, a measuring tape, a glue gun, a pair of pliers, and a ladder. Of course, it is also advised that you think along the lines of safety. In addition to the above mentioned tools, it may be a good idea to have a pair of safety goggles, a face mask, work gloves, and even a hard topped construction hat, just in case.

This article’s coverage of the information is as complete as it can be today. But you should always leave open the possibility that future research could uncover new facts.